Southco Inc SC-7377 Knob-Handle Vise-Action Compression Latch Grip Range .875 to 1.000, Southco Single Hole Mount

Southco Inc SC-7377 Knob-Handle Vise-Action Compression Latch Grip Range .875 to 1.000, Southco Single Hole Mount Reviews

Other Picture

Latches - Single Hole Mount

Visit Store Now !!

Detail Products

Detail Reviews

Oct 01, 2011 07:55:03

Southco Ball Joint Panel Fasteners, Receptacle (1 Each)

Southco Ball Joint Panel Fasteners, Receptacle (1 Each) Reviews

Other Picture

Latches - Butt Joint Panel Fastener - Progressively draws panels together. Helps provide airtight or water tight seal. Adjustability for manufacturing tolerances and gasket shrinkages. Uses 8mm hex to actuate. Bright chromate dipped, zinc plated carbon steel. Ultimate tensile load 1,400 lbs., ultimate shear load 2,000 lbs. Receptacle not included and must be purchased separately.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 30, 2011 01:47:04

7/8 Grip Range, Emka T-Handle Pawl Latches, w/o Padlocks, Chrome, Heavy Duty NEMA 4 Rated 1/4 Turn Latches (1 Each)

7/8 Grip Range, Emka T-Handle Pawl Latches, w/o Padlocks, Chrome, Heavy Duty NEMA 4 Rated 1/4 Turn Latches (1 Each) Reviews

Other Picture

Available in zinc die cast with chrome or black finish. Available with or without keyed locks. All locks are keyed alike. Keys included.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 29, 2011 05:11:07

Southco Inc SC-3735 Lever-Assisted Draw Latch 12 O.A.L., 79 Lbs Clamp Force

Southco Inc SC-3735 Lever-Assisted Draw Latch 12 O.A.L., 79 Lbs Clamp Force Reviews

Other Picture

Non-corrosive and UV resistant lever assisted draw latch. To operate, align pivot bosses on lever with slots in keeper. Snap lever over keeper detent. Overcenter action and detent keep latch closed. Latch absorbs and reduces vibration. Base, lever and keeper are made of black glass filled nylon. Latch body is black EPDM Rubber. Four mounting holes are designed for #10 screws (not included). Clamp forces listed are for average steady state at room temperatures. Three sizes available.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 26, 2011 14:58:03

Southco Inc SC-37861 T-Handle Draw Latch 2.44 W Handle, 4.00 Long

Southco Inc SC-37861 T-Handle Draw Latch 2.44 W Handle, 4.00 Long Reviews

Other Picture

Black rubber T-handle with metal bracket and keeper. Shipped assembled. Installs with .1875" rivets or #10 screws. Can be welded. Keeper is included.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 25, 2011 14:12:03

Southco Inc SC-0101-L Flush Recessed Latch Grip Range up to .50, 1 or 3 Point

Southco Inc SC-0101-L Flush Recessed Latch Grip Range up to .50, 1 or 3 Point Reviews

Other Picture

Single, two point or three point latch assemblies. Latches are available in bright chrome plated or matte black finish with a key lock option. Maximum working load 50 lbs. Ultimate load 160 lbs. Rods for two and three point assemblies must be ordered separately. Smaller size latches available as special order. Please call for price and delivery.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 24, 2011 16:31:44

Series 803 Toggle Latches, .2 Pull Up Ability, Stainless Steel (1 Each)

Series 803 Toggle Latches, .2 Pull Up Ability, Stainless Steel (1 Each) Reviews

Other Picture

Toggle Latches - 803 Series Strength: Ultimate: 220 Lbs. Working: 45 Lbs. Pull Up Ability: .2"

Visit Store Now !!

Detail Products

Detail Reviews

Sep 22, 2011 19:20:29

Battalion 1XPC5 Pivot Pawl, Silver, H 2 1/2 In

Battalion 1XPC5 Pivot Pawl, Silver, H 2 1/2 In Reviews

Other Picture

Heavy Duty Pivot Pawl, Type Non Locking, Push to Close, Material Steel, Color Silver, Zinc Plated Finish, Height 4 1/3 In, Depth 2 1/2 In, Width 6 11/16 In, Hardware Not Included

Visit Store Now !!

Detail Products

Detail Reviews

Sep 21, 2011 10:39:15

Southco Inc SC-62015 Lift-and-Turn Compression Latch Grip Range .23 to .63 Pawl Forward - 2.20 to 2.59 Pawl Reversed, Southco Lift and Turn Compression Latches

Southco Inc SC-62015 Lift-and-Turn Compression Latch Grip Range .23 to .63 Pawl Forward - 2.20 to 2.59 Pawl Reversed, Southco Lift and Turn Compression Latches Reviews

Other Picture

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish. Comes with mounting hardware. Maximum working load is 100 lbs. Mounting screws are M5 thread. For panels thicker than .25" a longer screw lockwasher combination will be needed (not supplied).

Visit Store Now !!

Detail Products

Detail Reviews

Sep 20, 2011 13:06:06

Keeper for Junior Prolatch (1 Each)

Keeper for Junior Prolatch (1 Each) Reviews

Other Picture

Similar to above ProLatch but for smaller applications. Ultimate breaking strength is 325 lbs. Keeper for PX-17 must be ordered separately below.

Visit Store Now !!

Detail Products

• Junior Prolatch (1 Each)

Detail Reviews

Sep 19, 2011 11:16:03

Southco Inc SC-1912 Swell Latch 1.53 Handle Length, Frame Thickness Up to .19

Southco Inc SC-1912 Swell Latch 1.53 Handle Length, Frame Thickness Up to .19 Reviews

Other Picture

Latches in any frame thickness, blind application, glass or plastic. Latches accommodate misalignment between door and frame. Black nylon handle and nut. Black rubber bushing provides sound deadening effect. When handle is lifted bushing diameter decreases allowing it to pass through the hole in the frame to unlatch door.

Visit Store Now !!

Detail Products

• Southco Inc SC-1908 Swell Latch 1.09 Handle Length, Frame Thickness Up to .13
• DEWALT DW7351 Folding Table for DW735 Planer
• Robert Larson 800-1800 Honing Guide
• Snow White and the Seven Dwarfs

Detail Reviews

Sep 18, 2011 00:24:04

2.25 O.A.L. x .93 W, .130 Mtg Holes, Style "B", Draw Pull Catches, 304 Stainless Steel (1 Each)

2.25 O.A.L. x .93 W, .130 Mtg Holes, Style "B", Draw Pull Catches, 304 Stainless Steel (1 Each) Reviews

Other Picture

Draw pull catches are available in two sizes. Available in zinc finished steel, unfinished steel and Type 304 stainless steel. HG-83341-R is padlockable. Strike included.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 17, 2011 01:55:04

15/16 Grip Range, Emka Slotted Pawl Latches, Stainless Steel, Heavy Duty NEMA 4 Rated 1/4 Turn Latches (1 Each)

15/16 Grip Range, Emka Slotted Pawl Latches, Stainless Steel, Heavy Duty NEMA 4 Rated 1/4 Turn Latches (1 Each) Reviews

Other Picture

Heavy Duty NEMA 4 Rated - 1/4 Turn Latches - Slotted Pawl Latches - Available in zinc die cast with chrome or black finish and Type 304 stainless steel. Other tool operations available as special order. Please call for price and delivery.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 16, 2011 02:48:05